|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Type: | Brake Shoes |
| Material: | Non-Asbestos |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.train brake pad for railway
2.material: semi metallic
3.suitable for speed 360km per hour
4.certification: ISO9001 TS16949
Semi-metallic Train Brake Pads for Railway
1.suitalbe for metro, inter-city trains, railway vehicles
2.good strengh and long life
3.temperature insensitiveness, good performance of heat
small heat fade for coefficient of friction
ISO9001, TS16949
professional factory of railway parts
Our factory is professional manufacture of brake pads and shoe,
and other spare parts for railway, mining, automobile, truck,
load vehicle and other field. We also welcome your OEM orders.
|
Semi-metallic Train Brake Pads for Railway |
|
|
According to customers` drawings, for train or wagon |
|
|
Heavy Duty Truck.Train.Bus,Automobile,petroleum drilling machine. |
|
|
Cast iron HT200 |
Composite material |
|
Refer to standard GB/T 9439-1988 |
1.rail way composite Brake shoe Material: Composite material, high friction composite brake shoe, low friction composite brake shoe 2.Advantage: --Composite friction material bearing high energy braking; --High coefficient of friction and stability, --small heat fade for coefficient of friction, --Temperature insensitiveness, --Develop according to the samples or drawings --Certification:ISO9001-2000 |
4. The HGM - A high friction composition brake shoe steel back and friction body two parts.
Brake shoe shape size (mm) :
(1) the steel back of outer arc: R450
(2) brake shoe width: 820-1
(3) the thickness of the brake shoe: 45
5. The steel back is made of Q235A steel manufacturing, steel plate performance shall comply with the provisions of GB/T700.
6. Brake shoe is made up of steel back and friction.Friction main raw material for: phenolic resin, nitrile rubber, steel fiber,
reduced iron powder, graphite, etc.
7. The friction performance component of the learning performance and friction wear performance of two parts.
The mechanical properties shall comply with:
Table 1 physical and mechanical performance of the brake shoe
Unit performance indicators
G/cm3 density less than nominal worth plus or minus 5%
The compression strength of 25 Mpa or greater
The impact strength acuity 2.0 kJ/m2
The compression modulus of Mpa to 1.3 * 103 or less
Rockwell hardness (HRR) 90 or less
Water absorption percentage < 1.5%
Oil absorption percentage < 1.5%
Brake friction wear performance should be consistent with:
Table 2.The change of the instantaneous friction coefficient range (20 kn brake shoe pressure)
Speed (km/h) 0 10 20 30 to 40 50 to 60
The maximum 0.63 0.602 0.558 0.546 0.515 0.482 0.471
Standard 0.48 0.46 0.43 0.42 0.39 0.37 0.36
The minimum 0.42 0.40 0.40 0.36 0.33 0.32 0.37
1.Q: What is the certificate of your factory?
A: We have passed IAF ISO and TS16949 certification.
2.Q: Can it be produced according to the sample?
A: Yes, we can produce through your samples or technical drawings. We can build molds and fixtures.
3.Q: Do you test all products before shipping?
A: Yes, we conduct 100% quality testing before delivery, and we are 100% responsible for product quality.
4.Q: What is your delivery time?
A:If we have stock, we can send it immediately within a week. If not, it usually ranges from 7 days to 35 days, depending on the quantity.
5.Q: What is your sample policy?
A: We want to provide you with samples for approval. There will be no charge for 1 or 2 samples, but the customer needs to bear the courier fee first.
It will be drawback to customer when order placed
6.Q: How do you make our business establish a long-term good cooperative relationship?
A:1. We maintain excellent quality and competitive prices to ensure that our customers benefit;
2. We respect every customer as our friend, we do business sincerely and make friends widely,No matter where they come from.
){kind=link}