| Customization: | Available |
|---|---|
| Type: | Brake Shoes |
| Material: | Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Brake Shoe | |
| Packaging Detail | BOX AND CARTON |
| Delivery Detail | 15-20DAYS |
| Asbestos-free truck brake shoe | 1. Hot- resistence 2. Long-time using 3. High quality raw 4,wear-resistant ,low-noise,less-dust 5,safe and reliabl. 6,competitive pricing and quality assured products 7,using life of brake shoe :40000km |
| Normal Temperature Friction Coefficient(100-150ºC) | 0.42±0.02 |
| Hot Friction Coefficient(250ºC-300ºC) | 0.42±0.01 |
| Wear Rate(×10-7m3/Nm150ºC) | 0.26-0.53 |
| Density(g/cm3) | 2.22 |
4. The HGM - A high friction composition brake shoe steel back and friction body two parts.
Brake shoe shape size (mm) :
(1) the steel back of outer arc: R450
(2) brake shoe width: 820-1
(3) the thickness of the brake shoe: 45
5. The steel back is made of Q235A steel manufacturing, steel plate performance shall comply with the provisions of GB/T700.
6. Brake shoe is made up of steel back and friction.Friction main raw material for: phenolic resin, nitrile rubber, steel fiber,
reduced iron powder, graphite, etc.
7. The friction performance component of the learning performance and friction wear performance of two parts.
The mechanical properties shall comply with:
Table 1 physical and mechanical performance of the brake shoe
Unit performance indicators
G/cm3 density less than nominal worth plus or minus 5%
The compression strength of 25 Mpa or greater
The impact strength acuity 2.0 kJ/m2
The compression modulus of Mpa to 1.3 * 103 or less
Rockwell hardness (HRR) 90 or less
Water absorption percentage < 1.5%
Oil absorption percentage < 1.5%
Brake friction wear performance should be consistent with:
Table 2.The change of the instantaneous friction coefficient range (20 kn brake shoe pressure)
Speed (km/h) 0 10 20 30 to 40 50 to 60
The maximum 0.63 0.602 0.558 0.546 0.515 0.482 0.471
Standard 0.48 0.46 0.43 0.42 0.39 0.37 0.36
The minimum 0.42 0.40 0.40 0.36 0.33 0.32 0.37
1.Q: What is the certificate of your factory?
A: We have passed IAF ISO and TS16949 certification.
2.Q: Can it be produced according to the sample?
A: Yes, we can produce through your samples or technical drawings. We can build molds and fixtures.
3.Q: Do you test all products before shipping?
A: Yes, we conduct 100% quality testing before delivery, and we are 100% responsible for product quality.
4.Q: What is your delivery time?
A:If we have stock, we can send it immediately within a week. If not, it usually ranges from 7 days to 35 days, depending on the quantity.
5.Q: What is your sample policy?
A: We want to provide you with samples for approval. There will be no charge for 1 or 2 samples, but the customer needs to bear the courier fee first.
It will be drawback to customer when order placed
6.Q: How do you make our business establish a long-term good cooperative relationship?
A:1. We maintain excellent quality and competitive prices to ensure that our customers benefit;
2. We respect every customer as our friend, we do business sincerely and make friends widely,No matter where they come from.
){kind=link}